Brother International Innov-is XJ1 Operation Manual - Page 164
Stitch Settings Screen
View all Brother International Innov-is XJ1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
STITCH SETTINGS SCREEN STITCH SETTINGS SCREEN Before creating the embroidery pattern, specify the stitch settings. Lines of the design are embroidered with various stitches and regions are embroidered with fill stitches or stippling stitches. Stitching of the regions was already selected in "Drawing Regions" on page 159, so specify values of detailed settings. After specifying the settings, press to create the embroidery pattern. Candlewicking Stitch Size Spacing Increases/reduces the size of the stitch. Specifies the spacing of the stitch. Chain stitch Size Repetition Increases/reduces the size of the stitch. Sets repeated embroidering at the same part. Specifying Individual Stitch Settings Select a pattern in the stitch settings screen to specify its line and region stitch settings. If multiple patterns are selected, the settings are applied to those patterns. ■ Line Settings ■ Region Settings 1 1 2 1 Shows the stitch type and color for the selected line. 2 Shows the stitch settings for the selected line. Line stitch settings Select the type of stitching you want applied to your line art, from zigzag stitch ( ), running stitch ( ), triple stitch ( ), candlewicking stitch ( ) or chain stitch ( ). Zigzag stitch Zigzag width Specifies the width of the stitch. Density Specifies the density of the stitch. Running stitch /Triple stitch * Both includes an under sewing. Run pitch Specifies the length of the stitch. 162 2 1 Shows the stitch type and color for the selected region. 2 Shows the stitch settings for the selected region. Fill stitch settings Direction Density Pull compensation Under sewing Specifies the embroidering direction. Select to change to the desired direction of fill stitch. Specifies the stitch density of fill stitch. Specifies to correct the shrinkage of the pattern by slightly shortening or lengthening the stitching. Change the setting after you embroider the pattern and can check the shrinkage. Select if you need or do not need the under sewing for the stabilized fabric. Stippling stitch settings Run pitch Spacing Distance Specifies the length of a stitch of the stippling stitch. Specifies the spacing between the stitches when embroidering the stippling stitch. Specifies the offset from the pattern outline. Decorative fill stitch settings Size Direction Outline Increases/reduces the size of the pattern. Specifies the rotation angle of the pattern. Select whether [ON] or [OFF] the outline is also converted to embroidery data. If [ON] is selected, the number of thread jumps can be reduced.