Brother International Innov-is XJ1 Operation Manual - Page 139
Sewing the Appliqué Position on the Base, Fabric, Affixing the Appliqué Piece to the Base,
View all Brother International Innov-is XJ1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
EMBROIDERING A PATTERN a b 1 Outline of appliqué 2 Fabric for appliqué piece Note • If the appliqué piece is cut out along the inside of the cutting line, it may not be correctly attached to the fabric. Therefore, carefully cut out the appliqué piece along the cutting line. • After cutting out the appliqué piece, carefully remove the thread. ■ 2. Sewing the Appliqué Position on the Base Fabric a Attach stabilizer material to fabric for the appliqué base. the wrong side of the b Sew the appliqué position. Note • If the appliqué piece cannot be attached to the base fabric with fabric glue or temporary spray adhesive, securely baste it in place with basting stitches. • If thin fabric is used for the appliqué piece, reinforce and secure it in place with an iron-on adhesive sheet. An iron can be used to attach the appliqué piece to the appliqué location. b After the appliqué embroidery frame piece is attached, to the machine. attach the Thread the machine with the embroidery thread, lower the presser foot lever, and then press the "Start/Stop" button to embroider the appliqué. 4 Basic Embroidery ■ 4. Embroidering the Remainder of the Pattern 1 Position of appliqué 2 Base fabric a Change the embroidery embroidery color order thread according display, and then to the finish embroidering the remainder of the pattern. a b c Remove unit. the embroidery frame from the embroidery Note • Do not remove the base fabric from the embroidery frame until all embroidering is finished. ■ 3. Affixing the Appliqué Piece to the Base Fabric a Lightly apply fabric glue or to the back of the appliqué temporary piece, and spray adhesive then attach it to the base fabric within the outline of the position sewn in step b of "2. Sewing the Appliqué Position on the Base Fabric". Memo • Since glue may become attached to the presser foot, needle or needle plate, clean off any glue after finishing embroidering the appliqué pattern. • For best results, trim all excess threads each time the thread color is changed. 137