Brother International Innov-is XJ1 Operation Manual - Page 16

NAMES OF MACHINE PARTS ■ Using the Flat Bed Attachment Pull the top of the flat bed attachment to open the accessory compartment. b Place the lid on top of the case so that the lid align with the tabs on the case, the and notches in then slide the bar on each side back to the locked position. ■ Storing Bobbin Clips Bobbin clips can be stored inside of the accessory case cover. a b 1 Presser foot storage tray 2 Presser foot storage space of the flat bed attachment ■ Using the Accessory Case (Included with Some Models)  Opening the accessory case Fully slide the bar on each side of the accessory case to the unlocked position, and then lift off the lid to open the case. The case can only be opened or locked correctly if both bars are slid in the same direction. Memo • Placing bobbin clips on bobbins helps prevent the thread from unwinding from the bobbin. In addition, snapping bobbin clips together allows the bobbins to be conveniently stored and prevents them from rolling around if they are dropped. a 1 Bars  Closing the accessory case a Fully slide the bar on each side lid to the unlocked position. of the accessory case 14