Brother International Innov-is XJ1 Operation Manual - Page 55
Adjusting the Amount of Fabric Feeding from, the Dual Feed Foot
View all Brother International Innov-is XJ1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
■ Adjusting the Amount of Fabric Feeding from the Dual Feed Foot The dual feed mechanism pulls the top fabric according to the set stitch length. With troublesome fabrics, fine tune the set length, by changing the dual feed feed adjustment in the settings screen. Note • As a default, some keys mentioned in the following procedures appear in light gray and are not available. To enable the keys for specifying the settings, attach the dual feed foot to the machine. The keys are enabled after the dual feed foot is detected. a Press . The settings screen appears. b Press . The sewing settings screen appears. c Display settings [Dual Feed screen. Feed Adjustment] in the sewing d Use or to increase or decrease the feeding of the top fabric. * Select [00] for sewing in most cases. * If the feed amount for the top fabric is too little, causing the fabric to be longer than the bottom fabric, press to increase the feed amount for the top fabric. * If the feed amount for the top fabric is too much, causing the fabric to be shorter than the bottom fabric, press top fabric. to decrease the feed amount for the e Press to return to the original screen. CHANGING THE PRESSER FOOT 1 Getting Ready 53