Brother International Innov-is XJ1 Operation Manual - Page 36
Wireless Network Connection Functions
View all Brother International Innov-is XJ1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
WIRELESS NETWORK CONNECTION FUNCTIONS c Press beside the SSID that was noted. e When the following message appears, press . When a connection is established, the following message appears. The screen for entering the network key (password) appears. Memo • If the SSID that was noted does not appear in the list, press . • If the SSID that was noted is not displayed, specify it as described below. 1 Select in the list of SSIDs. 2 Enter the desired network SSID, and then press . 3 Select the authentication method and encryption mode. • If the machine had already been connected to the home network, press saved SSID. , and then select the d Enter the network key (password) that was noted, and then press . f Press to exit the setup. Memo • While connected, the signal strength is indicated 1 7 by the icon in the upper-left corner of the display. 6 • Once a wireless network connection has been set 2 up, a connection will be established each time the 3 5 machine is turned on. However, [Wireless LAN Enable] in the network settings screen must remain 4 set to [ON]. 34 1 Text input area 2 Character keys 3 Caps key 4 Space key 5 Letters/numbers/symbols key 6 Backspace key (Deletes the character at the cursor's position.) 7 Cursor keys (Move the cursor to the left or right.)