Brother International Innov-is XJ1 Operation Manual - Page 59
Refer to STITCH SETTING CHART
View all Brother International Innov-is XJ1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
b Select the category you want. SEWING g Adjust the sewing speed with the speed control slide. * You can use this slide to adjust sewing speed during sewing. a b 1 Slow 2 Fast h Press the "Start/Stop" button to start sewing. * Guide the fabric lightly by hand. 2 Sewing Basics c Press the key of the stitch you want to sew. • For details on stitch patterns, refer to "STITCH SETTING CHART" on page 194. • For details on the key functions, refer to "Key Functions" on page 25. • If necessary, change to the desired stitch width or stitch length. (page 62) Memo • When the foot controller is being used, you cannot start sewing by pressing the "Start/Stop" button. i Press the "Start/Stop" button again to stop sewing. j Press (Thread cutter button) to trim the upper and bobbin threads. The symbol of the correct presser foot will be displayed in the upper left corner of the LCD screen. d Install the presser foot (page 50). CAUTION • Always use the correct presser foot. If the wrong presser foot is used, the needle may strike the presser foot and bend or break, possibly resulting in injury. Refer to "STITCH SETTING CHART" on page 194 for presser foot recommendations. e Set the fabric and thread in under the presser foot. Hold the fabric your left hand, and rotate the handwheel to set the needle in the sewing start position. The needle will return to the up position automatically. CAUTION • Do not press (Thread cutter button) after the threads have been cut. Doing so could tangle the thread or break the needle and damage the machine. • Do not press (Thread cutter button) when there is no fabric set in the machine or during machine operation. The thread may tangle, possibly resulting in damage. f Lower the presser foot. * You do not have to pull up the bobbin thread. 57