Brother International Innov-is XJ1 Operation Manual - Page 54
Attaching/Detaching Toe, Using the Dual Feed Position Lever
View all Brother International Innov-is XJ1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
CHANGING THE PRESSER FOOT c Position aligning the the dual feed foot to the presser foot notch of the dual feed foot to the bar by large screw. Side view ■ Attaching/Detaching Toe Attach the toe by aligning the pins with the notches and snap it into place. 1 Pins 2 Notches d Hold the dual then using the feed foot in disc-shaped place with your right hand, screwdriver securely tighten the large screw. a b If you push down on the front and back part of the dual feed foot, the toe of the dual feed foot will snap off. CAUTION • Use the included screwdriver to firmly tighten the screw. If the screw is loose, the needle may strike the presser foot and possibly cause injury. e Plug the connector of the dual on the back of your machine. feed foot into the jack ■ Using the Dual Feed Position Lever When the feed position lever is up, the black roller belt on the dual feed is not engaged. f Press to unlock all keys and buttons. All keys and operation buttons are unlocked, and the previous screen is displayed. When the feed position lever is down, the black roller belt on the dual feed is engaged. Note • Do not operate the lever while sewing. 52