Brother International Innov-is XJ1 Operation Manual - Page 196
Upgrading Your Machine's, Software, Stitch Setting Chart
View all Brother International Innov-is XJ1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
UPGRADING YOUR MACHINE'S SOFTWARE UPGRADING YOUR MACHINE'S SOFTWARE You can use USB media to upgrade software for your machine. When an upgrade program is available on " http:// s.brother/cpeaa/ ", please download the files following the instructions on the website and steps below. Note • When using USB media to upgrade the software, check that no data other than the upgrade file is saved on the USB media being used before starting to upgrade. STITCH SETTING CHART Memo • When any of the following stitches (reverse stitch patterns and reinforcement stitch patterns) are selected, pressing (Reverse stitch button) will sew reverse stitches. a While pressing (Automatic threading button), turn the main power to ON. b Press . When any other stitch is selected, pressing (Reverse stitch button) will sew reinforcement stitches. • The stitch pattern symbols indicate the following. 1 12 2 c Insert the USB media on the machine. into the primary (top) USB port d Press . When upgrading is finished, the completion message appears. e Turn the machine off, remove the machine on again. the USB media, and turn 1 Reverse stitch pattern 2 Reinforcement stitch pattern Note • The presser foot that is displayed on each screen when Free motion mode is OFF/ON is shown in the table under "Presser foot". * Twin needle can be used by attaching zigzag foot "J". Stitch Presser foot Stitch name/ Applications Straight stitch (Left) J*/O General sewing, gather, pintuck, etc. Straight stitch (Left) J*/O General sewing, gather, pintuck, etc. Straight stitch (Middle) J*/O General sewing, gather, pintuck, etc. Straight stitch (Middle) J*/O General sewing, gather, pintuck, etc. J*/O Triple stretch stitch General sewing for reinforcement and decorative topstitching Stitch width (mm (inch)) Stitch length (mm (inch)) Auto. Manual Auto. Manual 0.0 (0) 2.5 (3/32) 0.0 - 7.0 0.2 - 5.0 (0 - 1/4) (1/64 - 3/16) 0.0 (0) 2.5 (3/32) 0.0 - 7.0 0.2 - 5.0 (0 - 1/4) (1/64 - 3/16) 3.5 (1/8) 2.5 (3/32) 0.0 - 7.0 0.2 - 5.0 (0 - 1/4) (1/64 - 3/16) 3.5 (1/8) 2.5 (3/32) 0.0 - 7.0 0.2 - 5.0 (0 - 1/4) (1/64 - 3/16) 0.0 (0) 2.5 (3/32) 0.0 - 7.0 0.4 - 5.0 (0 - 1/4) (1/64 - 3/16) 194