Brother International Innov-is XJ1 Operation Manual - Page 60

SEWING Note • When cutting thread, such as metallic thread or other decorative threads, use the thread cutter on the side of the machine. Cut transparent nylon thread in the same way. Combining Stitch Patterns Stitch patterns from the following categories can be combined. k When the needle has stopped foot and remove the fabric. moving, raise the presser ■ Using the Foot Controller You can also use the foot controller to start and stop sewing. Example: Memo • When the foot controller is connected, you cannot use the "Start/Stop" button. • The foot controller cannot be used when embroidering. a Press . a Turn off the machine. b Insert the foot controller jack on the machine. plug into the foot controller 1 Foot controller jack a c Turn on the machine. d Slowly depress the foot controller to start sewing. b Select the following stitch pattern (8-35). Memo • The speed that is set using the sewing speed controller will be the foot controller's maximum sewing speed. e Release the foot controller to stop the machine. c Press so that it displays . d Press .  The display returns to the stitch selection screen. 58