Brother International Innov-is XJ1 Operation Manual - Page 63

SEWING (Reverse stitch button) (Reinforcement stitch button) Machine sews Machine sews + reverse stitches and reinforcement stops sewing when stitches and stops (Reverse stitch sewing when button) is pressed.* (At the beginning of sewing, reinforcement stitches are sewn automatically when "Start/Stop" button is pressed.) (Reinforcement stitch button) is pressed. (At the beginning of sewing, reinforcement stitches are sewn automatically when "Start/Stop" button is pressed.) with a stitch other than reverse or reinforcement stitch pattern selected. Machine sews reinforcement stitches and stops sewing when (Reverse stitch button) is pressed. (At the beginning of sewing, reinforcement stitches are sewn automatically when "Start/Stop" button is pressed.) Machine sews reinforcement stitches and stops sewing when (Reinforcement stitch button) is pressed. (At the beginning of sewing, reinforcement stitches are sewn automatically when "Start/Stop" button is pressed.) Machine sews Machine sews + reinforcement reinforcement stitches and stops stitches and stops sewing when (Reverse stitch button) is pressed. sewing after completing the stitch pattern, when (At the beginning of (Reinforcement sewing, stitch button) is reinforcement pressed. stitches are sewn (At the beginning of automatically when sewing, "Start/Stop" button reinforcement is pressed.) stitches are sewn automatically when "Start/Stop" button is pressed.) * If [Reinforcement Priority] of the settings screen is set to [ON] (page 27), reinforcement stitches are sewn instead of reverse stitches. Automatic Presser Foot Lowering Function and Thread Cutting Function By setting the machine to automatically raise and lower the presser foot, sewing operations can be performed more smoothly. 2 Sewing Basics 1 2 3 1 When [Auto Down] is set to [ON], pressing the "Start/Stop" button or depressing the foot controller automatically lowers the presser foot (if it is raised) before starting to sew. 2 When [Auto Up] is set to [ON], the presser foot is raised when stopping sewing. The presser foot is raised to the height specified for [Presser Foot Height] (page 27). When the pivot setting ( ) is selected, the presser foot is raised to the height specified for [Pivoting Height] (page 27). 3 When [Press to Trim] is set to [ON], pressing (Thread cutter button) automatically lowers the presser foot (if it is raised) before cutting the thread. The presser foot will be raised after the thread is cut. 61