Brother International Innov-is XJ1 Operation Manual - Page 31
Embroidery Settings, Wireless LAN Settings, Setting the [Eco Mode] and the [Shutoff, Support Mode]
View all Brother International Innov-is XJ1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
■ Embroidery Settings ■ Wireless LAN Settings LCD SCREEN 1 1 1 2 2 3 Getting Ready 3 4 4 5 5 6 6 7 7 8 9 8 9 0 A B C D 1 Select the embroidery frame to be used. 2 Select the center point marker or grid lines. 3 Select the thread color display on the embroidery screen; thread number, color name. (page 147) 4 Select the thread brand of the thread color display. (page 147) 5 Adjust the maximum embroidery speed (page 147). 6 Adjust the upper thread tension for embroidering (page 144). 7 Select the height of the embroidery foot during embroidering (page 127). 8 Select the display units for embroidering (mm/inch). 9 Select the color of the background for the embroidery display area. 0 Select the color of the background for the thumbnail area. A Select the size of pattern thumbnails. B Adjust the distance between the pattern and the basting stitching. (page 140) C Adjust the distance between the appliqué pattern and the outline (page 140). D Adjust the position and brightness of the embroidery foot "W+" with LED pointer (this setting is available if embroidery foot "W+" with LED pointer has been attached.) (page 131). 1 Enable/Disable the wireless LAN function (page 33). 2 Shows the connected SSID. 3 Set the machine to connect wireless LAN function. 4 Shows the machine name used on the wireless network. This name is used when transferring files from the machine to the embroidery editing software (PE-DESIGN 11). 5 Change the machine name used on the wireless network. 6 Check the wireless LAN status. 7 Display other menus. 8 Reset network operations. 9 Display the introduction to the application. ■ Setting the [Eco Mode] and the [Shutoff Support Mode] You can save the machine power by setting the [Eco Mode] and the [Shutoff Support Mode]. If you leave the machine turned on without using it for the set period of time, the machine enters in each mode. Press to display [Eco Mode] and [Shutoff Support Mode]. (page 28) [Eco Mode]; Machine will enter a sleep mode after the set period of time. Touch the screen or press the "Start/Stop" button to continue operating. [Shutoff Support Mode]; Machine will enter the lower power mode after the set period of time. Turn the machine off and then back on to restart operating. Note • If you turn off the machine while the machine is in the [Eco Mode] or the [Shutoff Support Mode], wait for about 5 seconds before turning on the machine again. 29