Brother International Innov-is XJ1 Operation Manual - Page 86

UTILITY STITCHES j Position the fabric with against the guide of the the edge of the folded presser foot, and then hem lower the presser foot lever. 1 Wrong side of fabric 2 Fold of hem 3 Guide ■ If the Needle Catches Too Much of the Hem Fold The needle is too far to the left. Press to decrease the stitch width so that the needle slightly catches the fold of the hem. k Adjust the the fold of stitch width until the the hem. (page 62) needle slightly catches 1 Needle drop point a b When you change the needle drop point, raise the needle, and then use and to decide the needle drop point. (The stitch width setting is in neither millimeters nor inches.) a b a 1 Thick fabric 2 Normal fabric 1 Wrong side of fabric 2 Right side of fabric b Memo • Blind hem stitches cannot be sewn if the left needle drop point does not catch the fold. If the needle catches too much of the fold, the seam appearing on the right side of the fabric will be very large, leaving an unattractive finish. l Sew with guide. the fold of the hem against the presser foot m Press the "Start/Stop" are finished, and raise button to stop sewing when you the presser foot and needle to pull the fabric under the presser foot towards the left of the machine. n Remove the basting the right side facing stitching out. and turn the fabric with 1 Wrong side of fabric 2 Right side of 1 2 fabric 84