Brother International Innov-is XJ1 Operation Manual - Page 163

Saved outlines Embroidery pattern outlines can be registered as stamp shapes. When registering stamp shapes, select from the last six embroidery patterns used. If more than six shapes are registered, the oldest one is automatically erased. For details on registering a stamp shape, refer to "Decorative Stitching around a Pattern in Embroidery (a Quilting Function)" on page 171. PATTERN DRAWING SCREEN Using the Select Key You can select the part of the design to move and/or edit. Some keys are available only after you select the part. a Press . Frame embroidering areas Select an embroidering area in order to arrange the pattern to fit an embroidery frame. * Press to return to the pattern drawing screen. c Press to set the selected stamp.  The pattern drawing screen appears. * You can change size of, rotate or move the shape right after you create it by pressing or . b Select the area you want to edit. * To select an area you want to edit, hold the touch pen (stylus) at a point on the screen and drag the touch pen (stylus) to create the red box around your selected area to be edited. Using the Erase Key a Press . b Select the shape of the eraser. c Edit the design with available keys. (Refer to "Key Functions" on page 157 for the details of each key function.) d Press , and then specify the stitch setting. 6 My Design Center  The pattern drawing screen appears. c Drag along the area or line that you want to erase while the key appears as . 161