Brother International Innov-is XJ1 Operation Manual - Page 70

USEFUL FUNCTIONS d Align the two screw holes in the straight stitch needle plate with the two holes in the needle plate mounting base, and then fit the straight stitch needle plate onto the machine. e Lightly needle finger-tighten the screw on the right side of plate. Then, use the included disc-shaped the screwdriver to firmly tighten the screw on the left side. Finally, firmly tighten the screw on the right side. 1 Round hole i Turn the main power to ON and then start sewing. * After sewing, make sure to remove the straight stitch needle plate and the straight stitch foot, and reinstall the regular needle plate, the needle plate cover and the presser foot "J". a f Insert the bobbin attach the needle case in its original plate cover. (page position, 176) and then g After reinstalling the the straight stitches. needle plate cover, select any of Note • If the needle plate has been removed, check machine operations to confirm that installation has been completed correctly. (page 181) • Selecting unavailable stitches will cause an error message to be displayed. • When the straight stitch needle plate is on the machine, the needle will automatically move to the middle position. Memo • You cannot change the needle position using the L/ R Shift. • Always secure the needle plate before inserting the bobbin case into its original position. CAUTION • Slowly rotate the handwheel toward you (counterclockwise) before sewing and make sure that the needle is not contacting the straight stitch foot and straight stitch needle plate. h Insert needle and attach the straight stitch foot. 1 Notch 2 Pin 68