Brother International Innov-is XJ1 Operation Manual - Page 167

LINE CONVERSION e Using the included touch pen (stylus), press then draw lines to trace the image. , and * For details on drawing lines, refer to "Drawing Lines" on page 158. LINE CONVERSION Custom patterns can be created from drawings. You can create patterns by loading an image on the application or a USB media. 1 1 Transparency adjustment * Press or background. to adjust the transparency of the Each press of lightens the background, making the line pattern darker. Each press of darkens the background, making the line pattern lighter. f After editing the pattern, settings for pattern. press to specify the g Press to create the embroidery pattern. Recommended line drawings for Line Conversion • Line drawings must be drawn clearly using lines with approximately 1 mm thickness. • Line drawings should be drawn in a strong contrast. • If the lines are too short or gathered too densely, they will not be loaded correctly. Note • For details on creating patterns using color illustrations, refer to "ILLUSTRATION CONVERSION" on page 167. • If you cannot convert the drawings as expected, you can edit the design in My Design Center. Refer to "PATTERN DRAWING SCREEN" on page 156. • Line drawings are converted without recognizing the thickness of lines. If you want to change the thickness of lines, specify in the settings screen. Refer to "STITCH SETTINGS SCREEN" on page 162. • Line drawings are converted as black lines. If you want to change the colors, specify in My Design Center. Refer to "Drawing Lines" on page 158. 6 My Design Center Create a Pattern with Line Conversion a Press .  The image display screen appears. 165