Canon Color imageCLASS 8180c imageCLASS MF8180c Software Guide - Page 27
Step 2 Connecting the Machine to a Network, Step 3 Checking Network Settings, NETWORK SETTINGS - ratings
View all Canon Color imageCLASS 8180c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Step 2 Connecting the Machine to a Network 1 Connect a Category 5 rated (Cat 5) twisted-pair LAN cable to the 100Base-TX/10Base-T port on the back of the machine. Connect the other end of the cable to a network router or a hub. 1 Installation Step 3 Checking Network Settings 1 Press [Menu] ➞ or the LCD ➞ press [Set]. MENU 6.NETWORK SETTINGS to select on 2 Press ➞ or to select ➞ press [Set]. NETWORK SETTINGS 2.VIEW IP ADDRESS 3 Press or to select the desired setting ➞ press [Set]. VIEW IP ADDRESS 1.IP ADDRESS 4 Press [Stop/Reset] to return to the standby display. Installing Software on Your Computer 1-15
Installing Software on Your Computer
1-15
Installation
1
Step 2 Connecting the Machine to a Network
1
Connect a Category 5 rated (Cat 5) twisted-pair LAN cable to the
100Base-TX/10Base-T port on the back of the machine. Connect
the other end of the cable to a network router or a hub.
Step 3 Checking Network Settings
1
Press [Menu]
➞
or
to select <6.NETWORK SETTINGS> on
the LCD
➞
press [Set].
2
Press
➞
or
to select <2.VIEW IP ADDRESS>
➞
press [Set].
3
Press
or
to select the desired setting
➞
press [Set].
4
Press [Stop/Reset] to return to the standby display.
MENU
6.NETWORK SETTINGS
NETWORK SETTINGS
2.VIEW IP ADDRESS
VIEW IP ADDRESS
1.IP ADDRESS