Canon EOS C300 Mark III EOS C300 Mark III EOS C500 Mark II Instruction Manual - Page 102

Recording Audio 102 Menu settings [CH1/CH2]1 [CH3/CH4]1 [CH2 Input]2 [INPUT Terminals] - [Monaural Mic] [MIC Terminal] - [Monaural Mic] Audio source selection switches INPUT 1 INPUT 2 - AES/EBU AES/EBU LINE, MIC, MIC+48V LINE, MIC, MIC+48V - - Recorded audio channels/audio sources CH1 Built-in microphone (mono) Built-in microphone (mono) Built-in microphone (mono) Built-in microphone (mono) Built-in microphone (mono) CH2 Built-in microphone (mono) Built-in microphone (mono) Built-in microphone (mono) Built-in microphone (mono) Built-in microphone (mono) CH3 CH4 INPUT 2 terminal (digital audio) - INPUT 2 terminal INPUT 1 terminal INPUT 2 terminal MIC terminal MIC terminal (L) (R) Built-in microphone (mono) Built-in microphone (mono) 1 > [¡ Audio Setup] > [Audio Input Selection] > [CH1/CH2] and [CH3/CH4] settings. 2 > [¡ Audio Setup] > [CH2 Input] setting. Using the optional EU-V2 Expansion Unit 2 When an optional EU-V2 Expansion Unit 2 with a commercially available V-mount battery is attached to the camera, you can use the EU-V2's INPUT terminals to record an analog audio source (INPUT 3 terminal to CH3 and INPUT 4 terminal to CH4). The analog audio source (LINE, MIC or MIC+48V) is determined by the audio source selection switches on the EU-V2. Menu settings [CH1/CH2]1 [CH3/CH4]1, 2 [CH2 Input]3 - [INPUT Terminals (Camera)]4 [MIC Terminal] [Monaural Mic] [INPUT Terminals (Exp. Unit)] [INPUT 2] [INPUT 1] - Audio source selection switches on the camera INPUT 1 INPUT 2 AES/EBU - LINE, MIC, MIC+48V AES/EBU LINE, MIC, MIC+48V - - Recorded audio channels/audio sources CH1 CH2 INPUT 1 terminal (digital audio) INPUT 1 terminal - INPUT 1 terminal INPUT 2 terminal INPUT 1 terminal INPUT 1 terminal MIC terminal MIC terminal (L) (R) Built-in microphone (mono) Built-in microphone (mono) CH3 INPUT 3 terminal INPUT 3 terminal INPUT 3 terminal INPUT 3 terminal INPUT 3 terminal INPUT 3 terminal CH4 INPUT 4 terminal INPUT 4 terminal INPUT 4 terminal INPUT 4 terminal INPUT 4 terminal INPUT 4 terminal 1 > [¡ Audio Setup] > [Audio Input Selection] > [CH1/CH2] and [CH3/CH4] settings. 2 For combinations of settings that do not use the [INPUT Terminals (Exp. Unit)] option, the recorded audio channels are the same as in the previous table. 3 > [¡ Audio Setup] > [CH2 Input] setting. 4 When the EU-V2 with a V-mount battery is attached to the camera, the option to use the INPUT terminals on the camera appears as [INPUT Terminals (Camera)] instead of [INPUT Terminals].