Canon EOS C300 Mark III EOS C300 Mark III EOS C500 Mark II Instruction Manual - Page 163
Other Connection Methods, In the [Select a network] screen, select [Camera Access Point Mode].
![]() |
View all Canon EOS C300 Mark III manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Configuring Connection Settings Other Connection Methods Ethernet Settings 1 In the [Network Type] screen, select [Ethernet ]. 2 Make sure the Ethernet cable is correctly connected (A 157) and select [Setup with Network Connection]. • Select [Setup without Network Connection] to only configure the settings, without connecting to the network. 3 To configure the IPv4 settings automatically and not use IPv6 settings, select [Automatic Setting] > [Disable]. • To configure IPv4 settings manually, continue with that procedure instead (A 167). • To use the default IPv6 settings, select [Enable] instead. After completing the wizard, change the IPv6 settings as necessary (A 169). 4 When the confirmation message appears, press SET to continue to configure the function settings. • The communication settings are saved to an [NW] file. • Continue with one the following procedures to configure the selected function's settings. FTP transfer (A 160), IP streaming (A 161), Browser Remote (A 162) 163 Camera Access Point 1 In the [Select a network] screen, select [Camera Access Point Mode]. 2 Select the configuration method. • Depending on the selected method, perform either step 3 or steps 4-9 and then continue to step 10. [Easy Connection] 3 The camera will assign the network name (SSID) and password automatically. Review the settings for the camera's Wi-Fi access point and select [OK]. • These settings are necessary to connect a network device to the camera. [Manual Connection] 4 Enter the SSID (network name) for the Camera Access Point and then select [OK]. • Press SET and enter the desired network name using the keyboard screen (A 36). 5 Select the Wi-Fi channel. • Select [Automatic Setting] to have the camera select the channel automatically, or select [Manual Setting] > Desired channel. 6 Select the encryption settings. • Select [AES] to use AES encryption, or [Disable] to use no encryption. • If you selected [Disable], skip to step 8. 7 Enter the password for the Camera Access Point and then select [OK]. • Press SET and enter the desired password using the keyboard screen (A 36). 8 To configure the IP settings automatically, select [Automatic Setting]. • To configure IP settings manually, continue with that procedure instead (A 167). 9 Review the settings for the camera's Wi-Fi access point and select [OK]. • These settings are necessary to connect a network device to the camera. • The password set by the user will not be shown on the screen.
![](/manual_guide/products/canon-eos-c300-mark-iii-eos-c300-mark-iii-eos-c500-mark-ii-instruction-manual-62c5ef1/163.png)