Canon EOS C300 Mark III EOS C300 Mark III EOS C500 Mark II Instruction Manual - Page 48
Recovering Clips, Select the desired clip a clip with
![]() |
View all Canon EOS C300 Mark III manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Preparing Recording Media Recovering Clips Some actions, such as suddenly turning off the camera or removing the card while data is being recorded, can cause data errors in the recorded clip. In MEDIA mode, you may be able to recover clips with corrupted data 48 using the following procedure. 1 Set the camera to MEDIA mode and open the index screen with the clip you wish to recover (A 133). 2 Select the desired clip (a clip with the icon instead of a thumbnail image). 3 Press SET to open the clip menu and select [Recover Clip] > [OK]. • The camera will attempt to recover the corrupted data. 4 When the confirmation message appears, press SET. NOTES • In the [RAW] index screen, recovered clips appear with a Ð icon instead of the usual thumbnail. • This procedure may delete clips shorter than 0.5 seconds in length. • In some cases, it may not be possible to recover the data. This is more likely when the file system is corrupted or the card is physically damaged. • Only clips recorded with this camera can be recovered. Photos cannot be recovered.
![](/manual_guide/products/canon-eos-c300-mark-iii-eos-c300-mark-iii-eos-c500-mark-ii-instruction-manual-62c5ef1/48.png)