Canon EOS C300 Mark III EOS C300 Mark III EOS C500 Mark II Instruction Manual - Page 169

Configuring Connection Settings Menu item [IP Streaming] [Protocol]* [Destination Server]*, [Dest. Port No.]*, [FEC Port No.]* [FEC Interval] [RTSP: User Name]*, [RTSP: Password]* [Video Output Conf.]* [Audio Out Channels]* Setting options and additional information [UDP], [RTP], [RTP+FEC], [RTSP+RTP] 10 to 100 (intervals of 5) [9Mbps/1920x1080 59.94P], [4Mbps/1920x1080 59.94P], [9Mbps/1920x1080 50.00P], [4Mbps/1920x1080 50.00P], [9Mbps/1920x1080 59.94i], [4Mbps/1920x1080 59.94i], [9Mbps/1920x1080 50.00i], [4Mbps/1920x1080 50.00i], [CH1/CH2], [CH3/CH4] * Change these settings as explained in the wizard (A 159). Deleting Communication Settings/Function Settings 1 Select Settings]. > [ Network Settings] > [Advanced Settings] > [Communication Settings] or [Function 2 Select the desired communication setting ([NW1] to [NW25]) or function setting ([MODE1] to [MODE25]). 3 Select [Delete Settings] > [OK]. • The communication setting/function setting will be deleted. 169 Configuring IPv6 Settings 1 Select > [ Network Settings] > [Advanced Settings] > [Communication Settings] > Desired communication setting ([NW1] to [NW25]) > [Change Settings] > [TCP/IPv6]. • Select the communication setting of a network in which you want to use IPv6 settings. 2 Select [TCP/IPv6 Settings] > [Enable]. 3 Select [Manual Setting] > [Enable]. • [DNS Server] changes to [Manual Setting] and you will be able to set the DNS server's address, prefix length and gateway address. • If you are not using a DNS server, select [DNS Server] > [Disable]. 4 Select [DNS Address], [Manual Address] (manually entered IPv6 address), [Prefix Length] (bits available for the network address) and [Gateway] (gateway's IP address) and enter the necessary information. • Enter the IP addresses and prefix length using the data entry screen (A 60). Reading a Root Certificate for FTPS Transfer When you select the [FTPS] transfer mode, you will need to read onto the camera the same root certificate saved on the FTP server. NOTES • Only root certificates with the following file names can be read by the camera: "ROOT.CER", "ROOT.CRT" and "ROOT.PEM".