Canon EOS C300 Mark III EOS C300 Mark III EOS C500 Mark II Instruction Manual - Page 70

ISO Speed/Gain ISO Speed/Gain In CAMERA mode, you may want to adjust the brightness of the image according to the shooting conditions. You can do so by changing the ISO speed or gain value to adjust the sensitivity of the sensor. 70 You can also perform this function remotely using Browser Remote on a connected network device (A 175, 178). Available ISO speed and gain settings1 Main recording format2 ISO/Gain3 XF-AVC [ISO] [Gain] [ISO] RAW [Gain] Increment4 [1 stop] [1/3 stop] [Normal] (3 dB) [Fine] (0.5 dB) [1 stop] [1/3 stop] [Normal] (3 dB) [Fine] (0.5 dB) Normal range Extended range5 1606, 200, 400, 800, 1600, 3200, 6400, 12800, 25600 100, 51200, 102400 160, 200, 250, 320, 400, 500, 640, 800, 1000, 1250, 1600, 2000, 2500, 3200, 4000, 5000, 6400, 8000, 10000, 12800, 16000, 20000, 25600 100, 125, 32000, 40000, 51200, 64000, 80000, 102400 -2 dB6, 0 dB to 42 dB -6 dB, -3 dB, 45 dB to 54 dB -2 dB to 42 dB 800, 1600, 3200, 6400, 12800, 25600 800, 1000, 1250, 1600, 2000, 2500, 3200, 4000, 5000, 6400, 8000, 10000, 12800, 16000, 20000, 25600 12 dB to 42 dB 42.5 dB to 54 dB 100, 200, 400, 51200, 102400 100, 125, 160, 200, 250, 320, 400, 500, 640, 32000, 40000, 51200, 64000, 80000, 102400 -6 dB to 9 dB, 45 dB to 54 dB -2 dB to 11.5 dB, 42.5 dB to 54 dB 1 The minimum sensitivity needed to obtain the recommended dynamic range depends on the gamma curve component of the [Gamma/Color Space] setting in the custom picture file (A 128). [Canon Log 2], [Canon Log 3], or [PQ]: ISO 800 / 12 dB gain [HLG] or [BT.709 Wide DR]: ISO 400 / 6 dB gain [BT.709 Normal]: ISO 160 / -2 dB gain 2 > [Æ Recording/Media Setup] > [Main Rec Format] setting. 3 > [v Camera Setup] > [ISO/Gain] setting. 4 > [v Camera Setup] > [ISO Increment] or [Gain Increment] setting. 5 Sensitivity settings that are outside the recommended range but can still be used by setting > [v Camera Setup] > [ISO/Gain Extended Range] to [On]. 6 Available only when [ISO/Gain Extended Range] is set to [Off].