Canon EOS C300 Mark III EOS C300 Mark III EOS C500 Mark II Instruction Manual - Page 55

Recording Video and Photos Icon/Display 4 Description Double slot recording (A 47). Custom Display 2: [Recording Mode] Recording operation STBY, ÜREC Clip recording: record standby, recording. 55 S&F STBY, S&F ÜREC Slow & fast motion recording (A 115): record standby, recording. PRE STBY, PRE ÜREC ` Pre-recording (A 118): record standby, recording. Recording command (A 145, 146). 2: [Rec Command] 00.00P, 00.00i U Frame rate (A 63). When slow & fast motion recording is activated, the shooting frame rate is also displayed (000/00.00P). Genlock (A 98). • Displayed only when an optional EU-V1 Expansion Unit 1 or EU-V2 Expansion Unit 2 is attached to the camera. 2: [Frame Rate] 2: [Genlock] 00:00:00.00 / 00:00:00:00 R, P, F, E Time code (A 94). Time code status (A 95). 2: [Time Code] Power supply level indicator (in red) 000 min Remaining battery charge of a BP-A60 (supplied) or BP-A30 (optional) Battery Pack and estimated remaining usage time (in minutes). • When is displayed, replace the battery pack with a fully charged one. • Depending on the conditions of use, the actual battery charge level may not be indicated accurately or may not match the levels shown on the [B System Setup] status screen or the indicators on the battery pack. 2: [Remaining Battery] DC IN 00.0V 000%, 00.0V Power supply voltage when using an AC adapter. • When the voltage falls below the selected low-power warning level (A 194), the voltage will be displayed in red. Remaining battery charge of a commercially available V-mount battery. • Available only when the optional EU-V2 Expansion Unit 2 is attached to the camera. • Depending on the battery used, the battery charge level cannot be indicated as a percentage. In that case, the voltage will be displayed instead. • When the power level falls below the selected low-power warning level (A 194), the percentage or voltage will be displayed in red. Right side of the screen Icon/Display ( only), , 60(24)fps, 60(30)fps ( only) 0000x0000 00 bit, YCC422 00 bit 7 (in red) Sensor mode (A 62). Description Output Terminals Status (A 121). Resolution (A 62). Color depth, color sampling (A 62). Photo recorded on the SD card (A 52). No SD card or cannot record photos on the SD card. MON. terminal disabled / HDMI OUT terminal active (A 145). T (in red) ^ (in yellow) J, K (in yellow) Output onscreen displays (A 147). Magnification (A 83). Peaking (A 83). Custom Display 2: [Sensor Mode] 2: [Output Terminals Status] 2: [Resolution/ Color Sampling] 2: [Photo] 2: [Output Terminals Status] 2: [OSD Output] 1: [Magnification] 1: [Peaking]