Canon PC720 Service Manual - Page 95
Detecting
View all Canon PC720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
4fAggtmOXi OPERATIONS AND TIMING ei E. Detecting Jams The copier is equipped with two copy paper sensors to check the presence/absence of copy paper and whether it is moving normally. • registration sensor (Q751) • delivery sensor (PS3) The presence/absence of copy paper or a jam is checked in reference to the presence/absence of copy paper at the respective sensors at such times as stored in the microprocessor in advance. The copier does not keep a record of the remaining number of copies to make or the copy mode effective at time of a jam so that it will be reset to standard mode when you open the copier to remove jams. The microprocessor has the following five 'no paper/jam' detection sequences, and it also identifies a jam if any of the sensor detects copy paper at power-on. 1. Absence of Paper in the Multifeeder Pick-Up Assembly (pick-up delay jam) In multifeeder mode, if copy paper does not reach the registration sensor within a specific period of time, the copier identifies a jam, stops the main motor in about 3 sec, and indicates the Add Paper message. If the registration sensor detect copy paper within this 3-min period (approx.), the copier identifies a pick-up delay jam and flashes the Jam message. Copy Start key ON V STBY INTR SCFW { Pick-up clutch solenoid (SL1) Jam check Registration sensor (Q751) Main motor (M1) 2.1sec 4 normal Figure 3-421 (normal) COPYRIGHT © 1994 CANON INC. CANON PC72OIT40R50ITTO REV.O AUG.1994 PRINTED IN JAPAN iIMPRIMEAUJAPON) 3 - 55