Canon PIXMA MP830 User's Guide - Page 142

z Incoming ring Sets whether to ring with an incoming call when the receive mode is set to or . A telephone needs to be connected for the machine to ring. Ring count Specifies the number of times the machine rings when is selected. z Manual/auto switch Sets, when the receive mode is set to or , whether to automatically receive faxes after the machine rang a specified length of time. RX start time Specifies the length of time until automatic reception is started when is selected. z Remote RX Enables/disables remote reception. Remote RX ID Specifies the remote reception ID when is selected. z RX image reduction Enables/disables automatic reduction of incoming faxes so that they fit in the selected paper. Image reduction direction Selects the image reduction direction when is selected. z RX start speed Selects the fax reception speed. z RX report Sets whether to print a reception report after each reception. Other Settings „ Read/write attribute Selects whether to allow data to be written onto memory cards from a computer. Important If you set this setting to , card direct printing cannot be done. After you finish operation of the memory card dedicated drive, be sure to revert this setting to . „ Volume control Selects the volume. z Keypad volume Selects the beep volume when pressing the buttons on the Operation Panel. z Alarm volume Selects the alarm volume. 140 Changing the Machine Settings Chapter 9