Canon PIXMA MP830 User's Guide - Page 45
Reducing or Enlarging a Copy
View all Canon PIXMA MP830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Note z To cancel copying, press [Stop/Reset]. z The machine can also receive faxes in copy mode (when [COPY] is pressed). Reducing or Enlarging a Copy You can reduce or enlarge copies. 1 Prepare for copying. See "Prepare for copying." on page 42. 2 Select the reduction/enlargement method. The example below assumes that you will select . (1) Press [Settings]. (2) Use [ ] or [ ] to select Tab 1. (3) Use [ ] or [ ] to select , and use [ ] or [ ] to select . Specify the custom copy ratio for reducing or enlarging copies. (3) Besides , you can also choose from the following reduction/ enlargement methods. Same magnification: Copies in the same size as an original. Preset ratio: Preset ratios are convenient when changing between standard page sizes, for example, when reducing A4 to A5, or enlarging B5 to A4. Fit-to-page: You can automatically reduce or enlarge the document to fit the size of the paper which are loaded in the Auto Sheet Feeder or Cassette. Note When loading the document on the ADF, you cannot select . (4) Press [ ] to move the cursor down, and use [ ] or [ ] to select the setting value. Holding down [ ] or [ ] steps through the values faster. Note When you choose , the document size may not be detected correctly depending on the document. In that case, choose , or . 3 Finalize your selection. (1) Press [Settings]. Return to the Copy standby screen. 4 Start copying. See "Start copying." on page 42. Chapter 2 Copying 43