Canon VIXIA HF R600 Instruction Manual - Page 268
Monitor while Out function. Ma, Date/Time]
View all Canon VIXIA HF R600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 268 highlights
Trouble? Unable to complete WPS. - Turn off the camcorder and access point. After a short while, turn them on again and try again. If the problem persists, perform setup using the [Search for Access Points] option (A 202). Unable to complete WPS. Try the operation again. - Some access points require pressing and holding the Wi-Fi Protected Setup (WPS) button. For details, refer to the instruction manual of your access point. - Make sure to touch [OK] on the camcorder's screen within 2 minutes of activating the Wi-Fi Protected Setup signal on the access point, whether by pressing the button or by entering the PIN code. Unable to connect - To avoid interference, use the camcorder at some distance from devices that emit electromagnetic waves (cordless phones, microwave ovens, etc.). Unable to connect to the Connect Station. - An error occurred while trying to pair the camcorder with the CS100 Connect Station. Check that the connect station is ready to establish a connection and carefully hold the camcorder close to the connect point on the connect station again (A 190). Unable to connect to the server - The camcorder could not access the external server used for the Monitor while Out function. Make sure the access point is correctly connected to the Internet. - Check that 1 > q > [Date/Time] is set to the correct date and time. 268