Canon VIXIA HF R600 Instruction Manual - Page 29
Charging the Battery Pac, it pressed down.
View all Canon VIXIA HF R600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Charging the Battery Pack 4 3 4 3 3 Attach the battery pack to the camcorder. • Press the battery pack softly into the battery attachment unit and slide it up until it clicks in place. 4 Charging will start when the camcorder is turned off. • If the camcorder was on, the green POWER/CHG indicator will go out when you turn off the camcorder. After a moment, the POWER/CHG indicator will turn on in red (battery pack charging). The red POWER/CHG indicator will go out when the battery pack is fully charged. • If the indicator flashes, refer to Troubleshooting (A 249). • Fully charging the supplied battery pack will take approximately 5 hours and 35 minutes (7 hours and 45 minutes for the BP-727 Battery Pack supplied with the E only). To remove the battery pack 1 Slide d in the direction of the arrow and hold it pressed down. 2 Slide the battery pack and then pull it out. 29