Cisco SGE2000 Configuration Guide - Page 62
Removing and Replacing the Fan Module, How to Remove the Fan Module - 24
![]() |
View all Cisco SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Fan Module Overview Figure 4-18 SCE Platform Fan Module 1 Chapter 4 Installation and Maintenance 92772 When a fan failure occurs, the environment monitor will send an error message to the console. An SNMP trap indicating that the fan is not functioning properly is also sent. Note that a fan failure is often audible. • Removing and Replacing the Fan Module • Replacing the Fan Module Removing and Replacing the Fan Module The following sections explain how to remove and replace a fan module in a SCE 2000 platform: Do not remove or install modules without using appropriate anti-static guard measures. The SCE 2000 includes an anti-static wrist strap in the accessory kit. Attach the copper tape strap to an unpainted metal surface on the chassis. You may leave the strap connected to the chassis when your have finished. • How to Remove the Fan Module How to Remove the Fan Module Note When removing the fan drawer, keep hands and fingers away from the spinning fan blades. Let the fan blades stop completely before removing the fan drawer. SUMMARY STEPS 1. Using a 1/4-inch flat-blade screwdriver, loosen the two captive screws on the faceplate of the fan module. 2. Grasp the fan module handle and remove it from the router. DETAILED STEPS Step 1 Using a 1/4-inch flat-blade screwdriver, loosen the two captive screws on the faceplate of the fan module. Step 2 Grasp the fan module handle and remove it from the router. 4-24 Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-06
![](/manual_guide/products/cisco-slm2024tna-configuration-guide-b7fffba/62.png)