Cisco SGE2000 Configuration Guide - Page 71

Step 2: How to Con the Hostname, Step 3: How to Set the Passwords

Get Cisco SGE2000 PDF manuals and user guides View all Cisco SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 71 highlights

Chapter 5 Connecting the Management Interfaces and Performing Initial System Configuration Initial System Configuration DETAILED STEPS 2. The current subnet mask is displayed. 3. The current IP address of the default gateway is displayed. Step 1 Step 2 Step 3 The current IP address is displayed. • To accept the displayed value, press Enter. • To change the value, type the desired value in the format "x.x.x.x" and press Enter. The current subnet mask is displayed. • To accept the displayed value, press Enter. • To change the value, type the desired value in the format "x.x.x.x" and press Enter. The current IP address of the default gateway is displayed. • To accept the displayed value, press Enter. • To change the value, type the desired value in the format "x.x.x.x" and press Enter. EXAMPLE: The following example displays a typical configuration of the IP address (10.1.5.109), subnet mask (255.255.0.0), and default gateway (10.1.1.3). Since the IP address and the subnet mask are related, when the IP address is changed, there is no longer a default value of the subnet mask, and it must be entered explicitly. Enter IP address [10.1.1.201]:10.1.5.109Enter IP subnet mask:255.255.0.0Enter IP address of default gateway [10.1.1.3]: Step 2: How to Configure the Hostname The hostname is used to identify the SCE 2000 . It appears as part of the CLI prompt and is also returned as the value of the MIB-II object sysName. The maximum length is 20 characters. The default hostname is SCE 2000 . Step 1 The current hostname is displayed. • To accept the displayed value, press Enter. • To change the value, type any desired character string and press Enter. EXAMPLE: Enter hostname [SCE 2000]: Step 3: How to Set the Passwords Configure the passwords as follows: OL-7824-06 Cisco SCE 2000 4xGBE Installation and Configuration Guide 5-7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
5-7
Cisco SCE 2000 4xGBE Installation and Configuration Guide
OL-7824-06
Chapter 5
Connecting the Management Interfaces and Performing Initial System Configuration
Initial System Configuration
2.
The current subnet mask is displayed.
3.
The current IP address of the default gateway is displayed.
DETAILED STEPS
Step 1
The current IP address is displayed.
•
To accept the displayed value, press Enter.
•
To change the value, type the desired value in the format
“x.x.x.x”
and press Enter.
Step 2
The current subnet mask is displayed.
•
To accept the displayed value, press Enter.
•
To change the value, type the desired value in the format
“x.x.x.x”
and press Enter.
Step 3
The current IP address of the default gateway is displayed.
•
To accept the displayed value, press Enter.
•
To change the value, type the desired value in the format
“x.x.x.x”
and press Enter.
EXAMPLE:
The following example displays a typical configuration of the IP address (10.1.5.109), subnet mask
(255.255.0.0), and default gateway (10.1.1.3).
Since the IP address and the subnet mask are related, when the IP address is changed, there is no longer
a default value of the subnet mask, and it must be entered explicitly.
Enter IP address [10.1.1.201]:
10.1.5.109
Enter IP subnet mask:
255.255.0.0
Enter IP address
of default gateway [10.1.1.3]:
Step 2: How to Configure the Hostname
The hostname is used to identify the
SCE 2000
. It appears as part of the CLI prompt and is also returned
as the value of the MIB-II object sysName.
The maximum length is 20 characters.
The default hostname is
SCE 2000
.
Step 1
The current hostname is displayed.
•
To accept the displayed value, press Enter.
•
To change the value, type any desired character string and press Enter.
EXAMPLE:
Enter hostname [
SCE 2000
]:
Step 3: How to Set the Passwords
Configure the passwords as follows: