D-Link DWC-1000 DWC-1000 User's Guide - Page 117
Field, Description, PPTP Client Configuration, Encryption Supported, User Time-out, Idle TimeOut
View all D-Link DWC-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Field MS-CHAPv2 Mppe 40 bit Mppe 128 bit Stateful Mppe Idle TimeOut VPN Settings Description PPTP Client Configuration Enables or disables support for MS-CHAPv2 authentication method. Introduces an additional feature not available with MSCHAP or standard CHAP authentication: the change password feature. This feature lets the client change the account password if the RADIUS server reports that the password has expired. Choices are: • Checked = enable support for MS-CHAPv2. • Unchecked = disable support for MS-CHAPv2. Encryption Supported Enables or disables MPPE 40-bit encryption (available only for MS-CHAP and MS-CHAPv2 authentication methods). Choices are: • Checked = enable MPPE 40-bit encryption. • Unchecked = disable MPPE 40-bit encryption. Enables or disables MPPE 128-bit encryption (available only for MS-CHAP and MS-CHAPv2 authentication methods). Choices are: • Checked = enable MPPE 128-bit encryption. • Unchecked = disable MPPE 128-bit encryption. Enables or disables stateful MPPE encryption (available only for MS-CHAP and MS-CHAPv2 authentication methods). Stateful encryption provides the best performance, but may be adversely affected by networks experiencing substantial packet loss. If you choose stateful encryption, configure flow control (SETUP > QoS > LAN QoS > Flow Control ) to minimize the detrimental effects of this lossiness. Choices are: • Checked = enable stateful MPPE encryption. • Unchecked = disable stateful MPPE encryption. User Time-out If there is no traffic from a user for more than the specified time out, the connection is disconnected. Entering an Idle TimeOut value of 0 (zero) means never log out. 117 DWC-1000 Wireless Controller User's Guide