D-Link DWC-1000 DWC-1000 User's Guide - Page 153

Viewing Status and Statistics Table 7-16. Fields on the MANAGED AP STATUS Page Field MAC Address IP Address Age Status Profile Radio Interface Description Ethernet address of the access point being managed by the wireless controller. Network IP address of the managed access point. Time of the last communication between the wireless controller and the access point. Current managed state of the access point. Possible values are: • Discovered = access point is discovered by the wireless controller, but is not yet authenticated. • Authenticated = access point has been validated and authenticated (if authentication is enabled), but it is not configured. • Managed = access point profile configuration has been applied to the access point and the access point is operating in managed mode. • Failed = wireless controller lost contact with the access point. A failed entry will remain in the Managed AP database unless you remove it. Note: a managed access point shows a failed status temporarily during a reset. Access point profile configuration currently applied to the managed access point. The profile is assigned to the access point in the Valid AP database. Wireless radio mode that each radio on the access point is using. Table 7-17. Buttons on the MANAGED AP STATUS Page Button Delete View AP Details View Radio Details View Neighbor Details View Neighbor Clients View VAP Details Description Clears existing access point. Shows detailed status information collected from the access point. Shows detailed status for a radio interface. Shows the neighbor access points that the specified access point has discovered through periodic RF scans on the selected radio interface. Shows information about wireless clients associated with an AP or detected by the access point radio. Shows summary information about the virtual access points (VAPs) for the selected access point and radio interface on the access points that the controller manages. 153 DWC-1000 Wireless Controller User's Guide