Epson ColorPage 8000 User Manual - Page 14
Ozone Safety, Operation in conditions of extremely low humidity
View all Epson ColorPage 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Introduction | 7 Your printer is a Class 1 laser product as defined in IEC 825 specifications. The label shown below is attached in countries where required. Ozone Safety Ozone gas is generated by laser printers as a byproduct of the printing process; it is produced only during printing. The print engine shall not exceed 0.02 ppm ozone concentration TWA (Time-Weighted Average). To minimize the risk of exposure to ozone, you should avoid the following conditions: • Use of multiple laser printers in a confined area (see above) • Operation in conditions of extremely low humidity • Poor room ventilation • Long, continuous printing together with any of the above The printer should be located so that the exhaust gases and heat generated are not blown directly into the user's face and are vented directly out of the building whenever possible. 7