Epson ColorPage 8000 User Manual - Page 40
Error messages continued, Replace Waste T
View all Epson ColorPage 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Monitoring the Printer | 2-9 Error messages (continued) Message Explanation Response See Paper Unit Open The multipurpose tray is pulled out. Push in the multipurpose tray. Photoconductr Trouble The photoconductor unit has a problem. Turn off the printer and replace the photoconductor unit. page 4-10 Replace Oil Roll The fuser oil roll is empty. Replace the fuser oil roll. page 4-6 Replace Photoconductr The photoconductor unit has reached the end of its service life. Replace the photoconductor unit. page 4-10 Replace Waste T The waste toner collector is full. Box Replace the waste toner collector. page 4-15 Service req e A controller error or a print engine error has been detected. Write down the error number and turn off the printer. Wait at least 10 seconds and then turn it back on. If this error still appears, turn off the printer, unplug the power cord, and contact IKON. page 4 Toner Crtg Out The indicated toner cartridge is missing. Install the indicated toner cartridge. page 4-2 Toner Out The indicated toner cartridge is empty. Replace the toner cartridge. page 4-2 Turn Paper Paper is loaded incorrectly. Turn the paper 90 degrees. page 1-7 Write Error DIMM A An internal error has occurred in the printer. Reset the printer by holding down the Alt and Reset buttons until Reset appears on the display. If the error is not cleared, contact IKON. page 4 Wrong The wrong photoconductor unit has Photoconductor been installed. Turn off the printer and replace the photoconductor unit. page 4-10 2-9