Epson ColorPage 8000 User Manual - Page 93

Clearing the Output Path Cover (Exiting Paper Jam)

Page 93 highlights

5-12 | Clearing Paper Jams and Other Problems Note If you see paper jammed in the path to the face-down output tray, don't try to pull it out of the tray. Follow the instructions in this section to clear the output path cover. Clearing the Output Path Cover (Exiting Paper Jam) When you see the Exiting Paper Jam message on the printer's control panel, follow these steps to clear paper from the output path cover: 1. Open the output path cover on the left side of the printer. 2. Carefully lift or pull the jammed paper out of the printer. 3. Close the output path cover. 5-12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121

5-12
5-12
|
Clearing Paper Jams and Other Problems
Clearing the Output Path Cover (Exiting Paper Jam)
When you see the
Exiting
Paper Jam
message on the printer’s control
panel, follow these steps to clear paper from the output path cover:
1.
Open the output path cover on the left side of the printer.
2.
Carefully lift or pull the jammed paper out of the printer.
3.
Close the output path cover.
Note
If you see paper jammed
in the path to the
face-down output tray,
don’t try to pull it out of
the tray. Follow the
instructions in this section
to clear the output path
cover.