Epson ColorPage 8000 User Manual - Page 27
Printing on Special Media, Printing on EPSON Color Laser Transparencies
![]() |
View all Epson ColorPage 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Handling Paper | 1-11 If you don't turn on Auto Continue (and you're using non-letter-size paper in the tray), the printer will stop and display a Paper Set message after you send your print job. You will then need to press the Continue button to print. For more information about using the control panel to configure the printer, see Chapter 3. Note Whenever you print on special media, make sure the Auto Continue feature is set on the printer's control panel. See page 1-10 for instructions. Printing on Special Media You can print on several types of special media, including EPSON color laser transparencies, envelopes, labels, and card stock. The quality of any particular brand or type of paper may be changed by the manufacturer at any time. Always test samples of paper or other media before purchasing large quantities. When you print on special media, you need to make sure the settings are correct in your printer properties or print dialog box, as described in the following sections. For more information, see the RIP Station 5000 User Addendum. Caution The only transparencies you can use in the ColorPage 8000 are manufactured for EPSON color laser printers. Do not use any other transparencies. Handle the sheets carefully and do not touch the printable surface (the side with the EPSON logo). Printing on EPSON Color Laser Transparencies You can load up to 75 transparencies in the multipurpose tray only. Follow these steps to print on transparencies: 1. Hold transparencies by the edges to avoid damage that can be caused by fingerprints. 2. Insert the transparencies in the multipurpose tray with the logo side face up and the arrows pointing into the printer, as shown: 1-11
![](/manual_guide/products/epson-colorpage-8000-user-manual-b3e299b/27.png)