Epson ColorPage 8000 User Manual - Page 28
Printing on Envelopes, Output Tray
View all Epson ColorPage 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
1-12 | Handling Paper Warning Transparencies that have just been printed may be hot. 3. Set up the print job in your application. Before you print, make sure you select the following options in your printer properties or print dialog box: • Media Type: Transparency • Output Tray: FaceUp Tray When you select the Transparency setting, the face-up output tray is selected automatically for straight-through printing. 4. If you want to have a series of transparencies printed in sequence, select the following Output option (if available): • Reverse Order If you load transparencies incorrectly, the printer stops and displays the message Check OHP Sheet on the control panel. Check the paper tray and the paper path to make sure transparencies are not jammed. Then load the transparencies correctly and try printing again. See page 5-6 for more information about clearing jams. Caution Do not use window envelopes unless they are specially designed for laser printers. The plastic on most window envelopes will melt when it comes in contact with the fuser. Printing on Envelopes You can print on most envelopes, as long as they don't have tape on the flap. Always test envelopes in the printer before you purchase large quantities. Print quality may be uneven on some envelopes because of their irregular thickness. The minimum size for envelopes is shown below: minimum 5.63 inches (including flap) minimum 3.5 inches 1-12