Epson ColorPage 8000 User Manual - Page 34
Saving Power in Standby Modes, Resetting the Printer
![]() |
View all Epson ColorPage 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Monitoring the Printer | 2-3 Saving Power in Standby Modes The printer has two power-saving modes, Standby Level 1 and Standby Level 2. In both modes, the printer saves power by lowering the fuser temperature. The printer enters Standby Level 1 when it is idle for 30 minutes. It takes approximately one minute to warm up when you send a print job. The printer enters Standby Level 2 when it is idle for 60 minutes. It takes approximately five minutes to warm up when you send a print job. You can disable the power-saving modes if necessary. See page 3-9 for instructions. Resetting the Printer If you decide to cancel a print job after the printer has started processing it, you can reset the printer. You may also need to reset after certain errors occur (see the list on page 2-7). Resetting stops the printer and clears the current print job. • To reset the printer, hold down the Alt and Reset buttons until Reset appears on the display. • To clear all jobs from the printer's memory and cancel all printer settings, hold down the Alt and Reset buttons until Reset All appears on the display. This has the same effect as turning off the printer and then turning it back on. On Line Form Feed Continue Reset Reset button Paper Source RITech Menu Page Size Copies Item Manual Feed MP Tray Size Value Orientation Out Bin Enter ^ Alt Alt button 2-3
![](/manual_guide/products/epson-colorpage-8000-user-manual-b3e299b/34.png)