Epson Perfection 1200U Scanner Basics - Page 19

Connect the Scanner to Your Computer

Get Epson Perfection 1200U PDF manuals and user guides View all Epson Perfection 1200U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Connect the Scanner to Your Computer If you are connecting to a PC, Windows 98 must be factory preinstalled on your system. 1. Make sure the scanner, computer, and any USB devices connected to your computer are turned off. The scanner is off when the Poperate button is out (not pushed down below the surface of the front panel). operate button 2. Locate the USB cable that came with your scanner. 3. Plug the square connector on the USB cable into the USB connector on the back of the scanner. Then plug the flat connector into the USB port on your computer or USB hub. Your system may not work correctly if you use a USB cable other than the one supplied by EPSON or if you connect your scanner through more than one hub. 4. Plug in the power cables for your computer, scanner, and other USB devices. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
12
Connect the Scanner to Your Computer
If you are connecting to a PC, Windows 98 must be factory preinstalled on your
system.
1.
Make sure the scanner, computer, and any USB devices connected to your
computer are turned off. The scanner is off when the
P
operate button is out
(not pushed down below the surface of the front panel).
2.
Locate the USB cable that came with your scanner.
3.
Plug the square connector
on the USB cable into the USB connector
on the back of the scanner. Then plug the flat connector
into the USB
port on your computer or USB hub.
Your system may not work correctly if you use a USB cable
other than the one supplied by EPSON or if you connect your
scanner through more than one hub.
4.
Plug in the power cables for your computer, scanner, and other USB devices.
operate button