Epson Perfection 1200U Scanner Basics - Page 68
Using the Transparency Unit, Loading Transparencies
View all Epson Perfection 1200U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Using the Transparency Unit Loading Transparencies Before scanning transparencies, wipe the lid of the transparency unit, the scanners document table glass, and the narrow window near the hinges. Be sure to keep the window uncovered when loading your transparencies. If your transparency obstructs the window, the colors in your scans will be affected. You can load transparencies in the film holders or you can place them directly on the document table, as described in the following sections. window lid Using Film Holders Three film holders are included with the transparency unit. To place film in the holders, see the instructions for the type of film youre scanning. To remove a film holder from the document table, lift it out by its tab. Hold the film by the edges or use gloves. Touching the film surface with bare hands can leave fingerprints or other marks on the film. Placing the Film Film has two sides, a base side that is shiny and a dull side with the emulsion. The base side of the film has the film makers name and film ID numbers printed on it. Film should always be loaded in the film holders or placed on the document table with the base side down. 61