HP 5100 Service Manual - Page 122
Front cover and Tray 1,
UPC - 808736092500
View all HP 5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Note Front cover and Tray 1 The front cover and the Tray 1 guide must be removed individually. 1 Open the front cover (callout 1). 2 Disengage the Tray 1 guide pins (callout 2) from inside the front cover by pushing the guides outward. The cover and Tray 1 will separate from each other. 3 Press the Tray 1 guide (callout 3) against the printer. 32 Figure 46. 12 2 Front cover removal 4 Release the front cover, allowing it to pivot freely on its keyed pins. The cover will slide off the pins to the right at its lowest position. 5 Release the Tray 1 guide by allowing the guide to slide off the keyed pins at its lowest position. Figure 47. Tray 1 guide removal 120 Removing and replacing parts Q1860-90918
120
Removing and replacing parts
Q1860-90918
Front cover and Tray 1
Note
The front cover and the Tray 1 guide must be removed individually.
1
Open the front cover (callout 1).
2
Disengage the Tray 1 guide pins (callout 2) from inside the front cover by pushing the guides
outward. The cover and Tray 1 will separate from each other.
3
Press the Tray 1 guide (callout 3) against the printer.
Figure 46.
Front cover removal
4
Release the front cover, allowing it to pivot freely on its keyed pins. The cover will slide off the
pins to the right at its lowest position.
5
Release the Tray 1 guide by allowing the guide to slide off the keyed pins at its lowest
position.
Figure 47.
Tray 1 guide removal
2
2
1
2
2
3