HP 5100 Service Manual - Page 142
Tray 1 roller, Tray 1 roller removal
UPC - 808736092500
View all HP 5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Tray 1 roller 1 Open the top cover and remove the toner cartridge. 2 Facing the front of the printer, raise the green center handle of the registration assembly. 3 Lift the locking tab (callout 1) on the right-side roller cam, and slide the cam to the right. 4 Slide the roller between the two cams, and then remove the roller from the shaft. 12 2 Figure 69. Note Note Tray 1 roller removal To reinstall If the Tray 1 separation pad should be replaced, replace the separation pad before you replace the pickup roller (see "Tray 1 separation pad" on page 141). 1 Orient the roller so that the thumb grip (callout 2) is on the left. 2 Insert the roller onto the shaft, and then slide the roller to the right until it is seated. 3 Slide the roller and cam to the left until they click into place. Make sure that the locking tab is engaged by trying to move the roller to the right. The roller will not move if the locking tab is engaged. 140 Removing and replacing parts Q1860-90918