HP 5100 Service Manual - Page 161
Registration assembly
UPC - 808736092500
View all HP 5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
Registration assembly 1 Remove the top cover (see page 115), the left side cover (page 123), the pickup gear assembly (page 136), the main gear assembly (page 134), and the transfer guide (page 128, steps 1 and 2). 2 Release the e-ring (callout 1) that is on the registration assembly clutch, and remove the clutch. 12 Figure 92. Note Registration assembly removal (1 of 2) 3 Remove two screws in the top, middle of the printer (see figure 76 on page 145, callout 1). These screws are already removed if you have removed the paper-feed roller assembly. They are common to both the paper-feed roller assembly and the registration assembly. Q1860-90918 6 Removing and replacing parts 159
Q1860-90918
6 Removing and replacing parts
159
Registration assembly
1
Remove the top cover (see page 115), the left side cover (page 123), the pickup gear
assembly (page 136), the main gear assembly (page 134), and the transfer guide (page 128,
steps 1 and 2).
2
Release the e-ring (callout 1) that is on the registration assembly clutch, and remove the
clutch.
Figure 92.
Registration assembly removal (1 of 2)
3
Remove two screws in the top, middle of the printer (see figure 76 on page 145, callout 1).
Note
These screws are already removed if you have removed the paper-feed roller assembly. They are
common to both the paper-feed roller assembly and the registration assembly.
2
1