HP 5100 Service Manual - Page 145
Tray 2 separation pad,
UPC - 808736092500
View all HP 5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Note Note Tray 2 separation pad This procedure applies to Tray 2 and to any optional 250-sheet tray. 1 Remove the paper from the tray. Callout 1 in figure 73 shows a detail of the separation pad. 2 While pressing down the paper lift plate (callout 2), reach under the front of the tray and squeeze the black tabs (callout 3 in figure 74) to release the separation pad from the tray. 2 12 Figure 73. Tray 2 separation pad removal (1 of 2) 32 Figure 74. Tray 2 separation pad removal (2 of 2) 3 Pull the spring off of the old separation pad, and then insert the spring onto the new separation pad. 4 Replace the separation pad. Q1860-90918 6 Removing and replacing parts 143
Q1860-90918
6 Removing and replacing parts
143
Tray 2 separation pad
Note
This procedure applies to Tray 2 and to any optional 250-sheet tray.
1
Remove the paper from the tray.
Note
Callout 1 in figure 73 shows a detail of the separation pad.
2
While pressing down the paper lift plate (callout 2), reach under the front of the tray and
squeeze the black tabs (callout 3 in figure 74) to release the separation pad from the tray.
Figure 73.
Tray 2 separation pad removal (1 of 2)
Figure 74.
Tray 2 separation pad removal (2 of 2)
3
Pull the spring off of the old separation pad, and then insert the spring onto the new
separation pad.
4
Replace the separation pad.
2
2
1
2
2
3