HP 5100 Service Manual - Page 153
shaft. The shaft holds the Tray 1 lift plate, and must be installed on top of it. Also make sure
UPC - 808736092500
View all HP 5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
5 Release the tabs (callout 2) of the gear that is on the left side of the shaft, outside of the chassis, and slide the gear off. 2 Figure 84. Note Tray 1 shaft removal (2 of 2) 6 Slide the shaft to the right, and then angle it out of the chassis. Make sure that the Tray 1 lift plate (with its spring) is pressed down before you reinstall the Tray 1 shaft. The shaft holds the Tray 1 lift plate, and must be installed on top of it. Also make sure that the shaft is reinstalled in the correct orientation. Q1860-90918 6 Removing and replacing parts 151
Q1860-90918
6 Removing and replacing parts
151
5
Release the tabs (callout 2) of the gear that is on the left side of the shaft, outside of the
chassis, and slide the gear off.
Figure 84.
Tray 1 shaft removal (2 of 2)
6
Slide the shaft to the right, and then angle it out of the chassis.
Note
Make sure that the Tray 1 lift plate (with its spring) is pressed down before you reinstall the Tray 1
shaft. The shaft holds the Tray 1 lift plate, and must be installed on top of it. Also make sure that
the shaft is reinstalled in the correct orientation.
2
2