HP LH4r HP Netserver LP 1000r User Guide - Page 65
Rack Mounting the HP Netserver
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
7 Rack Mounting the HP Netserver (2-Post) Introduction This chapter provides the instructions for mounting the HP Netserver in a two-post (column) non-HP rack. The illustration below shows the characteristics of the 2-post (CPI - Chatsworth Products Inc.) rack. If you have one of the four-post HP racks, see Chapter 8, "Rack Mounting the HP Netserver (4-post)," or Chapter 13, "Alternative Rack Mounting (4-post)," for instructions. If you are mounting the Netserver in a non-HP rack, refer to the documentation in the appropriate rack accessory kit. B A Characteristics of 2-Post Rack: A. U-shaped column for easy access B. Top is secured to ceiling to hold additional weight. C. Base is bolted to floor. C Figure 7-1. Features of 2-Post Rack 59
59
7
Rack Mounting the HP Netserver
(2-Post)
Introduction
This chapter provides the instructions for mounting the HP Netserver in a
two-post (column) non-HP rack. The illustration below shows the characteristics
of the 2-post (CPI – Chatsworth Products Inc.) rack.
If you have one of the
four-post HP racks, see Chapter 8, "Rack Mounting the HP Netserver (4-post)," or
Chapter 13, "Alternative Rack Mounting (4-post)," for instructions. If you are
mounting the Netserver in a non-HP rack, refer to the documentation in the
appropriate rack accessory kit.
Characteristics of
2-Post Rack:
A. U-shaped column for easy
access
C.
Base is bolted to floor.
B. Top is secured to
ceiling to hold
additional weight.
A
B
C
Figure 7-1. Features of 2-Post Rack