HP LH4r HP Netserver LP 1000r User Guide - Page 89
Connecting the Monitor, Keyboard, Mouse, and UPS
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
9 Connecting the Monitor, Keyboard, Mouse, and UPS Introduction Use the procedures listed here to connect the peripheral devices to the HP Netserver LP 1000r. 1. Connect the monitor, keyboard, and mouse to the HP Netserver LP 1000r using the connections provided on the rear of the chassis. See Figure 9-1. When connecting the Netserver to peripherals, use the cable ties and labels provided with the product. NOTE The two USB connectors are reserved for printers, scanners, and external modems, but not the keyboard or mouse. Power Mouse Parallel LAN A/MGMT LAN B PCI Slot (1) Keyboard USB (2) Serial A/MGMT Video External SCSI Connector Figure 9-1. Rear Panel Ports NOTE If you have a console switch box, refer to the switch box user guide for instructions on connecting the keyboard, mouse, and monitor. CAUTION The Keyboard and Mouse ports are both PS/2 ports, but are not interchangeable. If you plug the keyboard into the Mouse port, or the mouse into the Keyboard port, you will get an error message and the system will not finish the boot process. 83