HP LH4r HP Netserver LP 1000r User Guide - Page 87
Secure the Netserver chassis to the rack with the captive screws.
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Chapter 8 Rack Mounting the HP Netserver (4-Post) Figure 8-6. Mounting the HP Netserver 5. Slowly move the Netserver chassis into the outer-rail assemblies until the Netserver is completely in the rack. See Figures 8-6. The securing brackets on the front of the Netserver should stop the chassis from going all the way into the rack. 6. Secure the Netserver chassis to the rack with the captive screws. Attaching the Front Bezel The front bezel attaches to the HP Netserver by pivoting on two pins at the bottom and grasping the top pins with spring latches. The middle pins force the bezel to pivot in or out, ensuring a rotating action. 81
Chapter 8
Rack Mounting the HP Netserver (4-Post)
81
Figure 8-6. Mounting the HP Netserver
5.
Slowly move the Netserver chassis into the outer-rail assemblies until the
Netserver is completely in the rack. See Figures 8-6.
The securing brackets on the front of the Netserver should stop the chassis
from going all the way into the rack.
6.
Secure the Netserver chassis to the rack with the captive screws.
Attaching the Front Bezel
The front bezel attaches to the HP Netserver by pivoting on two pins at the bottom
and grasping the top pins with spring latches. The middle pins force the bezel to
pivot in or out, ensuring a rotating action.