HP rp3440 Installation Guide, Seventh Edition - HP 9000 rp3410 and HP 9000 rp3 - Page 13
Installing the System, Introduction
View all HP rp3440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
1 Installing the System This chapter provides information on how to install the system. This chapter addresses the following topics: • "Introduction" on page 13 • "Unpacking and Inspecting the Server" on page 22 • "Installing Additional Components" on page 25 • "Installing the Server Into a Rack, Non-HP Rack, or Pedestal" on page 66 • "Connecting the Cables" on page 67 • "Console Setup" on page 69 • "Accessing the Host Console" on page 78 • "Powering ON and Powering OFF" on page 80 • "Booting the Operating System" on page 82 • "Troubleshooting" on page 85 Introduction The HP 9000 rp3410 server is a 1P/1C, 1P/2C, rack- or pedestal-mount server. Similarly, the HP 9000 rp3440 server is a 1P/1C, 1P/2C, or 2P/2C, rack- or pedestal-mount server. Both of these servers are based on the PA-RISC processor family architecture. The server accommodates up to 12 DIMMs and internal peripherals including disks and DVD. Its high availability features include hot-swappable power supplies and hot-pluggable disk drives. The supported operating system is HP-UX 11i v1 (and newer HP-UX versions that support PA-RISC systems). Chapter 1 13