HP rp3440 Installation Guide, Seventh Edition - HP 9000 rp3410 and HP 9000 rp3 - Page 22
Installation Sequence and Checklist, Unpacking and Inspecting the Server, Verifying Site Preparation
View all HP rp3440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Installing the System Unpacking and Inspecting the Server Installation Sequence and Checklist Follow the steps in Table 1-6 sequentially to ensure successful installation of the server. Table 1-6 Installation Sequence Checklist Step Description 1 Unpack and inspect the server shipping container; inventory the contents using the packing slip. 2 Install additional components shipped with the server. 3 Install the server into a rack- or pedestal-mount. 4 Connect cables to the server. 4a Connect dc input power cable. 4b Connect LAN core I/O cable. 5 Set up the console. 6 Power on the server. 7 Access the console. 8 Boot the operating system. 9 Verify the server configuration. Completed Unpacking and Inspecting the Server This section describes procedures you perform before installation. Ensure that you have adequately prepared your environment for the new server, received the components that you ordered, and verified that the server and its containers are in good condition after shipment. Verifying Site Preparation Verifying site preparation is an essential factor of a successful server installation and includes the following tasks. Step 1. Gather LAN information and determine the two separate IP addresses for the iLO MP LAN and the system LAN. Step 2. Establish a method to connect to the server console. Step 3. Verify electrical requirements and ensure that grounding specifications and power requirements have been met. Step 4. Validate server physical space requirements. Step 5. Confirm environmental requirements. 22 Chapter 1