HP rp3440 Installation Guide, Seventh Edition - HP 9000 rp3410 and HP 9000 rp3 - Page 19
Additional Controls and Indicators, Control Panel, Hard Disk Drive LED Indicators
View all HP rp3440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Installing the System Introduction Figure 1-6 Control Panel Locator Button and LED Diagnostics LEDs (Disabled) LAN LED Power Button System LED Power On/Off LED 1 2 3 4 LAN System Additional Controls and Indicators The HP 9000 rp3410 or HP 9000 rp3440 server can have up to three low-voltage differential (LVD), 3.5 inch form factor hard disk drives (HDDs) installed. These hard disk drives have LEDs that provide status and activity information. Hard Disk Drive Indicators The hard disk drives have two LEDs per drive, as described below. • Status LED-The drive status LED is not used on the HP 9000 rp3410 or HP 9000 rp3440 server. • Activity LED-The Drive Activity LED is flashing green and indicates disk drive activity. This LED is directly controlled by the disk drive and turns on when a drive is accessed. Figure 1-7 Hard Disk Drive LED Indicators Status LED - (Not used) Activity LED Table 1-3 lists the hard disk drive LED definitions. Table 1-3 Hard Disk Drive LED Definitions LED Activity Description Status LED Activity LED None Flashing green Not used Ready/scanning hard drive Chapter 1 19